Beijing Golden Eagle · Since 2003

Hot Stamping Die Equipment Solution

4-machine line for hot-foil stamping dies (zinc, magnesium, copper) — used in packaging and decorative finishing.

CE Certified 24h Quotation 1-Year Warranty Worldwide Delivery
Hot Stamping Die Equipment — Beijing Golden Eagle

Production Process Flow

From raw material to finished part — the complete 4-step production line for hot stamping die.

1
Exposure
Image the die pattern
2
Developing
Open the resist
3
Etching
Form die relief
4
Shearing
Cut to final size

Complete Equipment List

Every machine on the production line, with its function and link to the product page.

#MachineFunction on this line
01Single Side Vacuum Exposure MachineImage the die pattern
02Baking OvenCure resist before etching
03Hot Stamping Die Etching MachineEtch zinc / magnesium / copper dies
04Metal Shearing MachineCut finished dies to size

Key Production Parameters

What to specify when requesting a quote for this production line.

Die materialZinc, magnesium, copper
Thickness1 – 8 mm
Max die size400 × 600 mm
Relief depth0.2 – 2.0 mm
Throughput20 – 80 dies / shift
Operators1 – 2 per shift
Floor space~30 m²
Best forPackaging, decorative foil

Sample Products

Examples of parts made on a typical hot stamping die line.

Related Technical Articles

Read more about the equipment and processes in this solution.

Frequently Asked Questions

Common questions about our hot stamping die line.

What are hot stamping dies used for?
Dies for hot foil stamping and embossing on packaging, book covers, cards and decorative products.
What machines are included in the line?
Four stations: exposure, developing, etching and shearing.
What die materials can it process?
Zinc, magnesium and copper, chosen by run length and detail — magnesium for short runs, copper and brass for long runs and fine relief.
Can it etch multi-level relief?
Yes. Depth and multi-level etching are supported; depth is set by the etch process and die material.
What is the lead time and how do I get a quote?
Send artwork, die size and material. We return a configured BOM, layout and quote within 48 hours.

Ready to plan your hot stamping die line?

Send us your part samples, target throughput, and facility constraints. Our engineers will send back a configured BOM, layout sketch, and quote within 48 hours.

Send your requirements